An independent reference on health and safety in a home workshop. We do not make diagnoses, do not sell equipment or materials and do not replace a doctor; we are not connected with the former website on this domain. For an injury, something in the eye or poisoning, see a doctor; in an emergency, call 112 (or your local emergency number).

health in the workshop: a reference on working safely with wood

Bioresurse: a reference on health in the home workshop

A shelf for the box room, raised beds at the country house, a new floor in the living room: working with wood is satisfying, but along with the shavings, dust rises into the air, machines are loud, and varnishes and solvents have a sharp smell. Here we explain calmly, without scaremongering, how to look after your breathing, eyes, hearing, hands and back, and when it is time to see a doctor after work.

A good workshop starts not with an expensive machine but with habits: switch on the dust extraction, put on safety glasses, clean up the dust with a damp cloth and take a break in time.

— Editor's note

Where to start

Dust and breathing

Fine wood dust hangs in the air for a long time and settles on everything around. We explain why it is better to capture it at the source, clean it up with a vacuum or a damp cloth, and how to choose a suitable respirator.

Eyes and hearing

A splinter flying off a saw and a loud machine used without hearing protection are common causes of trouble. We explain which glasses and ear defenders you need and when it is time to see a doctor about your eyes or ears.

Hands and back

Cuts, splinters, tool vibration and heavy boards. We look at where gloves help and where they are dangerous, how to lift loads more carefully and when a wound needs to be seen by a doctor.

Varnishes, treatments and smoke

Solvents, wood stains and treated timber call for ventilation, gloves and careful storage. Why treated offcuts must never be burned in a stove or on a bonfire is explained separately.

Reference sections

  • Topics

    Topics by group: dust and breathing, eyes and hearing, hands and back, varnishes, treatments and smoke. Plus the article catalogue.

  • Prevention

    Habits that protect your health in the workshop: dust extraction and cleaning, protective equipment, breaks, tidiness and storing varnishes.

  • Methods

    How safety is approached: first remove the source of harm, then dust extraction, then protective equipment; how to choose a respirator.

  • Research

    What is known about wood dust, how to read news about the harms and benefits of materials, and why natural does not mean harmless.

  • Questions

    Which doctor to see after working in the workshop, what to tell them about materials and how to prepare for the appointment.

  • Glossary

    Workshop words in plain language: wood dust, dust extractor, respirator, wood stain, wood preservative, MDF, carbon monoxide.

  • Sources

    What this reference is based on, why it contains no numeric limits and where the boundaries of general safety texts lie.

Cleaning up after cutting in five steps

  1. Switch off the tool and wait for it to stop

    A saw or sander keeps spinning for a while after you switch it off. Never clear shavings by hand near moving parts: first let it stop completely, then unplug it.

  2. Put on a respirator

    Cleaning up stirs fine dust back into the air. Put on a respirator that fits snugly to your face before you start collecting the sawdust, not afterwards.

  3. Collect the dust with a vacuum or a damp cloth

    Do not sweep the dust with a brush or blow it away with compressed air: that spreads it around the whole room. A workshop vacuum or a damp cloth works better, and larger shavings can be gathered with a dustpan.

  4. Wipe down surfaces

    Dust settles on the workbench, shelves, windowsill and even light fittings. Go over them with a damp cloth, remember door handles and light switches, and shake out your work clothes outdoors.

  5. Air the room

    Open a window or door and let the air change. If you have been working with varnish or solvent, ventilate for longer and do not stay in the room while the smell lingers.

Frequently asked questions

Can I buy anything here or chat with other woodworkers?

No. Bioresurse is a reference: there is no shop, no discussion board and no private messaging. We do not sell machines, tools, materials or protective equipment. We explain in general terms how to look after your health in the workshop.

Which respirator should I choose?

We do not recommend particular brands. Instead, we explain what to look for: a respirator should suit the size and shape of your face, fit snugly without gaps and be rated for the dust or vapours you work with. More in the methods section.

What should I do if a wood chip gets in my eye?

Do not rub the eye and do not try to remove the particle with a finger, tweezers or the corner of a tissue. You can gently rinse the eye with clean water and then see an eye doctor. If there is severe pain, bleeding or a large fragment in the eye, call 112 (or your local emergency number).

Is wood dust really harmful?

Yes, and it is worth knowing about without panicking. In 1995 the International Agency for Research on Cancer categorised wood dust as carcinogenic to humans. That is exactly why we keep recommending dust extraction, damp cleaning and a respirator: the less dust you breathe in, the better.

About this reference

Bioresurse is an independent reference on health and safety when working with wood at home. It has no connection with earlier websites on this domain and does not reproduce their content.

We write for people who make things at home or at the country house, do their own DIY repairs or are just planning to set up a corner with a workbench. Each topic is broken down step by step: what to notice, what you can calmly do yourself and when you need a doctor.

  • Topics

    Topics by group: dust and breathing, eyes and hearing, hands and back, varnishes, treatments and smoke. Plus the article catalogue.

  • Prevention

    Habits that protect your health in the workshop: dust extraction and cleaning, protective equipment, breaks, tidiness and storing varnishes.

  • Questions

    Which doctor to see after working in the workshop, what to tell them about materials and how to prepare for the appointment.

  • Sources

    What this reference is based on, why it contains no numeric limits and where the boundaries of general safety texts lie.

Sources

  • IARC monographs (International Agency for Research on Cancer)
  • General occupational health and safety guidance
  • Manufacturers' instructions for materials: read the label

This text reflects general understanding of working safely with wood as of the date it was prepared. Pain, an eye injury, a cough or ringing in the ears that does not go away is a reason to be examined in person, not to make decisions on your own based on a reference.