Prevention
Prevention
Almost everything that protects your health in the workshop comes down to simple habits: capture dust where it is created, put on protection before you start, keep tools and tins in order and stop in good time. Below is a plan that suits most home woodworkers.
Protective equipment only helps when you are wearing it: glasses pushed up on your forehead and ear defenders hanging on a nail by the door protect neither your eyes nor your hearing.
What you will need
- A workshop vacuum or dust extractor that can be connected to the tool
- Safety glasses that fit snugly and do not fog up straight away
- Ear defenders or earplugs for working with loud tools
- A respirator chosen for the size of your face and the type of dust or vapour
- Gloves for handling boards and a separate pair for varnishes and solvents
- A lockable cupboard or box for chemical tins, out of children's reach
Capture dust at the source
It is best when the dust has no chance to spread. Connect a vacuum or dust extractor to the saw or sander if the tool allows it, and work so that the airflow carries dust away from your face.
Hypothetical example: someone sanding a tabletop on the balcony connects a workshop vacuum to the sander; by the end there is hardly any dust on the floor and no cloud hanging in the air.
Put on protection before switching on
Safety glasses, hearing protection and a respirator are needed from the very first minute, not once it has already become dusty or noisy. Check that your glasses do not interfere with the respirator and that there is no gap between them.
Hypothetical example: before cutting a board, someone hangs ear defenders round their neck and only then realises it is awkward to put them on with one hand while holding the workpiece; now they put everything on in advance.
Think about your hands
Gloves protect against splinters when carrying boards and against varnish when finishing. But near rotating parts, such as a saw, drill press or lathe, gloves are dangerous: the fabric can be caught and pull your hand in with it. Work there without gloves and keep your hands well away from the blade.
Hypothetical example: a woodworker wears thick gloves while unloading boards, takes them off before drilling and puts on a different, thin pair when picking up the wood stain.
Secure loose clothing
Loose sleeves, scarves, long hair worn down, bracelets and chains easily catch on rotating parts. Roll up or fasten your sleeves and tie your hair back.
Hypothetical example: before working at a machine, someone takes off a hoodie with drawstrings and puts on a work jacket with snug cuffs.
Take breaks
Fatigue, rushing and monotony often go hand in hand with injuries. From time to time switch off the tool, step away from the bench, drink some water, stretch your hands and back and air the room.
Hypothetical example: after a long spell of sanding, a woodworker's fingers go numb; they put the sander down, go outside for some air and come back to the job later.
Lift boards with care
Lift a heavy or long board with two people, with bent knees and a straight back, holding the load close to your body. Do not twist your body while carrying a load; move your feet instead.
Hypothetical example: a homeowner carries long floorboards together with a neighbour rather than one at a time on their own through the whole flat.
Clean with a vacuum or damp cloth, do not sweep
After work, collect the dust with a vacuum or a damp cloth, wipe down surfaces and air the room. A brush and compressed air only stir fine dust back into the air.
Hypothetical example: instead of sweeping up the sawdust, a family wipes the floor with a damp mop and washes work clothes separately from everything else.
Store varnishes and solvents separately
Keep tins tightly closed, in a cool place away from heating, flames and food, in a cupboard children cannot reach. Never decant chemicals into drink bottles. Do not leave rags soaked in oil or varnish bundled up: read the label to find out how to deal with them.
Hypothetical example: a homeowner keeps leftover wood stain in its original labelled tin on the top shelf of a locked cupboard in the shed, not on the kitchen windowsill.
Common mistakes
- Sweeping up sawdust with a brush or blowing dust away with compressed air
- Wearing gloves when working near a rotating blade or drill bit
- Taking your glasses off for a second to look at something and not putting them back on
- Getting used to noise and thinking hearing protection is only for building sites
- Painting and varnishing in a closed room where people then sleep
- Burning offcuts of painted or treated wood in a stove or on a bonfire
- Working late when tired and rushing to finish at any cost
If that doesn't work
- If you have no dust extraction, work outdoors or by an open window, choose methods that create less dust and do damp cleaning more often
- If your glasses fog up, try another model that works better with your respirator, and never work without eye protection
- If a board is too heavy to lift alone, ask someone to help or cut the piece into sections where it lies
- If varnish makes you dizzy, stop work, go out into the fresh air and next time choose a well-ventilated place
Check yourself
- Dust is captured at the source rather than spreading around the room
- Safety glasses, hearing protection and a respirator go on before the tool is switched on
- Near rotating parts you work without gloves, with sleeves and hair secured
- You take breaks and do not work when tired
- Cleaning is done with a vacuum or damp cloth, not a brush
- Varnishes and solvents are closed and stored out of children's reach
Situation, what helps and when to see a doctor
| Situation | What helps | When to see a doctor |
|---|---|---|
| Dust from cutting and sanding | Dust extraction or a vacuum on the tool, a respirator, damp cleaning | A cough, breathlessness or eye irritation does not go away |
| Loud tools | Ear defenders or earplugs from the very start of work | Ringing in the ears or muffled hearing persists |
| Flying chips | Safety glasses that fit snugly | Something in the eye is bothering you, or the eye hurts or turns red |
| Cuts and splinters | Attention to the blade, gloves when carrying boards | The wound is deep, bleeding or inflamed, or a splinter will not come out |
| Varnishes and solvents | Ventilation, suitable gloves, reading the label | Dizziness, nausea, a skin rash, or the substance got into the eyes |
| Heavy boards | Lifting with two people, bent knees, load close to the body | Back pain does not go away or spreads down the leg |
See also
- Topics
Topics by group: dust and breathing, eyes and hearing, hands and back, varnishes, treatments and smoke. Plus the article catalogue.
- Methods
How safety is approached: first remove the source of harm, then dust extraction, then protective equipment; how to choose a respirator.
- Glossary
Workshop words in plain language: wood dust, dust extractor, respirator, wood stain, wood preservative, MDF, carbon monoxide.
- Questions
Which doctor to see after working in the workshop, what to tell them about materials and how to prepare for the appointment.
Sources
- IARC monographs (International Agency for Research on Cancer)
- General occupational health and safety guidance
- Manufacturers' instructions for materials: read the label
This text reflects general understanding of working safely with wood as of the date it was prepared. Pain, an eye injury, a cough or ringing in the ears that does not go away is a reason to be examined in person, not to make decisions on your own based on a reference.